Abstract

Bu çalışmada ele alınan akı anahtarlamalı makine yapısal açıdan incelenmiştir. Araç süspansiyon sistemine yönelik tüp tipi akı anahtarlamalı doğrusal makinanın nümerik analizi gerçekleştirilmiştir. Ansys Maxwellde yeralan genetik algoritma optimizasyon aracı kullanılmıştır. Vuruntu kuvvetini azaltmaya yönelik iki amaç foksiyonu tanımlanmıştır. Ayrıca lazer yer değiştirme sensörü ile hareketli mesafe değişimi incelenmiştir.

References

[1] Gysen, B. L., Paulides, J. J., Janssen, J. L., Lomonova, E. A. Active electromagneticsuspension system for improved vehicle dynamics. IEEE Transactions on VehicularTechnology, 2009; 59.3: 1156-1163
[2] Arslan, S., Gurdal, O. Polygonal Tubular Linear Permanent Magnet Generator Analysisand Experimental Test. Scientia Iranica, 2019; doi: 10.24200/sci.2019.50094.2739
[3] Arslan, S., Overview Of Generating Electricity From Wave Energy Systems AndInvestigation Of Generator Topologies Used In Archimedes Wave Swing Systems,International Conference on Natural Science and Engineering (ICNASE’16), Kilis, 2016.
[4] Li, H., & Pillay, P. (2011). A methodology to design linear generators for energy conversionof ambient vibrations. IEEE Transactions on Industry Applications, 2011, 47.6: 2445-2452.
[5] Lu, Z., Zhou, H., Liu, P., Liu, G., Chen, L. Design and analysis of five-phase fault-tolerantradially magnetized tubular permanent magnet motor for active vehicle suspensions. 19thInternational Conference on Electrical Machines and Systems (ICEMS), 1-4, 2016.
[6] Ohashi, S. Basic characteristics of the linear synchronous generator using mechanicalvibration of the automobile. InElectrical Machines and Systems (ICEMS), 1550-1554,2010.
[7] Ebrahimi, B., Khamesee, M. B., Golnaraghi, M. F. Feasibility study of an electromagneticshock absorber with position sensing capability. In Industrial Electronics, 34th AnnualConference of IEEE (IECON), 2988-2991, 2008.
[8] Wang, J., Wang, W., Atallah, K., & Howe, D. Comparative studies of linear permanentmagnet motor topologies for active vehicle suspension. In Vehicle Power and PropulsionConference, 1-6, 2008.
[9] Kang, M., Ji, J., Liu, G., Zhao, W. A new tubular fault-tolerant permanent-magnet motorfor active vehicle suspension. In IECON 2012-38th Annual Conference on IEEE IndustrialElectronics Society, 4082-4086, 2012.
[10] Wang, J., Wang, W., Atallah, K., Howe, D. Design considerations for tubular fluxswitching permanent magnet machines. IEEE Transactions on Magnetics, 2008; 44.11:4026-4032.
[11] Arslan, S., Oy, S. A. Design and Optimization of Tube Type Interior Permanent MagnetsGenerator for Free Piston Applications. TEM Journal, 2017; 6.2: 214.