References
[1]K. Başaran, K., Çetin, N. S., Çelik, H., “Rüzgar-Güneş Hibrit Güç Sistemi Tasarımı veUygulaması” 6. International Advanced Technologies Symposium (IATS’11), Sayfa 114-119,2011.
[2] Zhijun P., Mohammad R. Herfatmanesh, Yiming L., "Cooled solar PV panels for outputenergy efficiency optimisation", Journal of Energy Conversion and Management, Vol.150,pp.949-955, 2017
[3]B. Kamanga, J. S. P. Mlatho, C. Mikeka, and C. Kamunda, “Optimum Tilt Angle forPhotovoltaic Solar Panels in Zomba District, Malawi,” Journal of Solar Energy, vol. 2014,Article ID 132950, 9 pages, 2014.
[4] Arslan, K., Kurukavak A., Çalişma Akişkani Olarak Ag/Saf Su Nanoakişkani Kullanilan BirVakum Tüplü U-Borulu Güneş Kolektörünün Deneysel Olarak Incelenmesi, Yüksek lisans tezi,Karabük Üniversitesi, Karabük, Türkiye, 2019
[5] Çolak, S. Ç., “Fotovoltaik Paneller Yardımı İle Güneş Enerjisinden Elektrik EnrjisiÜretiminin Maliyet Analizi Ve Gelecekteki Projeksiyonu” Yıldız Teknik Üniversitesi FenBilimleri Enstitüsü Yüksek Lisans Tezi, 2010
[6] Abdoulatif Bonkaney, Saïdou Madougou, and Rabani Adamou, “Impacts of Cloud Cover andDust on the Performance of Photovoltaic Module in Niamey,” Journal of Renewable Energy,Vol. 2017, Article ID 9107502, 8 pages, 2017.
[7] Thomas, R., Fordham, M., 2001. Photovoltaics and Architecture, Spon Press, London andNewyork.
[8] R. Mazón-Hernández, J. R. García-Cascales, F. Vera-García, A. S. Káiser, and B. Zamora,“Improving the Electrical Parameters of a Photovoltaic Panel by Means of an Induced or ForcedAir Stream,” International Journal of Photoenergy, vol. 2013, Article ID 830968, 10 pages,2013.
[9] B. J. Brinkworth, B. M. Cross, R. H. Marshall, and H. Yang,“Thermal regulation ofphotovoltaic cladding,” Solar Energy,vol. 61, no. 3, pp. 169–178, 1997.– For Journals
[10] K. V. Wong and O. De Leon, “Applications of nanofluids: current and future,” Advances inMechanical Engineering, vol. 2, Article ID 519659, 2010
[11] Lazaroiu Cristian George, Longo Michela, Roscia Mariacristina, Pagano Mario, (2015).“Comparative analysis of fixed and sun tracking low power PV systems considering energyconsumption”, Energy Conversion and Management, 92, pp.143-148
[12] R. Kamada, T. Yagoika, S. Adachi, A. Handa, K. Fai Tai, T. Kato, andH. Sugimoto, “NewWorld Record Cu(In,Ga)(Se,S)2 Thin Film Solar Cell Efficiency Beyond 22%,” Proceedings ofthe 43th IEEE Photovoltaic Specialist Conference, pp. 1287–1291, 2016.
[13] T. Nakada, Y. Hirabayashi, T. Tokado, D. Ohmori, and T. Mise, “Novel devicestructure for Cu(In,Ga)Se2 thin film solar cells using transparent conducting oxide back and frontcontacts,” Solar Energy, vol. 77, no. 6, pp. 739–747, 2004.
[14] Green, Martin A., et al. "Solar cell efficiency tables (version 50)." Progress in Photovoltaics:Research and Applications 25.7 (2017): 668-676
[15] Rok Stropnik, Uroš Stritih, "Increasing the efficiency of PV panel with the use of PCM","Journal of Renewable Energy", Vol.97, pp.671-679, 2016
[16] https://www.kontrolkalemi.com/forum/konu/g%C3%BCne%C5%9F-pilleri.117695/
[17] https://www.rfwireless-world.com/calculators/Solar-Cell-Efficiency-Calculator.html