Abstract

This study is about design and manufacturing of transfer trolleys which are used in marble cutting process in marble industry. During the cutting process, all movements are controlled by switches and control buttons. Different forces are applied on the trolley and the trolleys are exposed to an operation under water which is used for cooling the cutting tool. Since the deflection of the transfer trolley will affect the quality of cutting during the cutting process, the concrete is poured into the body of the transfer trolley to reduce the deflections during the design and to maintain a rigid body. Natural stone industry has an important place both in Turkey and world trade and it is classified as very hazardous for processing, modeling and finishing operations according to occupational health and safety legislations. The risks which may occur during the cutting process have been identified and taken into consideration, necessary electronic and mechanical precautions have been taken to eliminate these risks.

References

[1] Çimen H, Çınar SM, Nartkaya M. The Investigation of Marble Cutting Parameters for Energy Consumption. International journal of mathematical models and methods in applied sciences, Issue 4, Volume 2, 2008
[2] Ersoy A, Atıcı U. Performance characteristics of circular diamond saws in cutting different types of rocks. Diamond and Related Materials, Elsevier Transactions on, Vol.13, pp 22-37, Jan. 2004.
[3] Yaman Ö. Mermer fabrikalarında ürün kalite kontrolünün görüntü analiz yöntemi ile belirlenmesi, Dokuz Eylül Üniversitesi Fen Bilimleri Enstitüsü Yüksek Lisans Tezi, 2015
[4] Ersoy M, Yeşilkaya L, Gülseven H. Mermer işleme tesislerinde moloz ve blok kesme verimlerinin karşılaştırılması. Tübav bilim dergisi, Cilt:5, Sayı:4, Sayfa:33-42, 2012
[5] Akarslan E, Çınar SM, Mermer Makineleri için Enerji Verimliği Artırıcı Kontrolör Geliştirilmesi. ELECO '2012 Elektrik - Elektronik ve Bilgisayar Mühendisliği Sempozyumu, 2012, Bursa
[6] Çınar İ, Şensöğüt C. Türkiye Mermer Ocaklarında Risk Değerlendirmesi ve Uygulama Örnekleri. 8.Uluslararası Kırmataş Sempozyumu, 13-14 Ekim 2016, Kütahya-Türkiye
[7] Gümüş A, Akkoyun Ö. Mermer ocak işletmeciliğinde sık karşılaşılan iş kazaları üzerine bir inceleme, Mersem 2006, Türkiye Mermer ve Doğaltaş Sempozyumu, Afyon, 2006
[8] FEM 1.001 Booklet 2, Classification and loading on structures and mechanisms, 1998
[9] https://download.sew- eurodrive.com/download/pdf/10522913 SEW Eurodrive, Project  planning of drives, date of access 26.01.2018 pdf
[10] FEM 1.001 Booklet 4, Checking for fatigue and choice of mechanism components, 1998
[11] DIN15070, Berechnungsgrundlagen für laufrader, DK 621.873-254.001.24, 197
[12] http://bexon.com.au/wp-content/uploads/2016/06/TGN_08-Crane-rail-selection-09-12.pdf
[13] https://www.engineeringtoolbox.com/ip-ingress-protection-d_452.html, date of access  26.01.2018
[14] IEC 60529. Degrees of protection provided by enclosures (IP Code). Edition 2.1  2001-02
[15] FEM 9.683. Selection of lifting and travelling motors. Federation Europeenne de la  Manutention, Section IX, 1995