The Academic Perspective Procedia publishes Academic Platform symposiums papers as three volumes in a year. DOI number is given to all of our papers.
Publisher : Academic Perspective
Journal DOI : 10.33793/acperpro
Journal eISSN : 2667-5862
Year :2018, Volume 1, Issue 1, Pages: 283-292
09.11.2018
Influence of mineral additions on the microstructure of concrete in chloride environment
In this work we have designed an experimental campaign with four different dosages of concrete to study the influence of the principal additions used in marine environments. The effect of material composition [Sulfate Resistant Portland Cement (SRPC), Blast Furnace Slag Portland Cement (BFSPC), Silica Fume (SF) and Fly Ash (FA) with four different mix designs] was performed by means of differential thermal analysis (DTA), mercury intrusion porosimetry (MIP), gas permeability, chloride diffusion and mechanical properties of concrete. In order to simulate the aggressiveness of the marine environment the concretes were immersed in a sodium chloride solution with a concentration of 1 molar during different times of 182, 365 and 546 days. According to the results obtained, the SRPC and SRPC+FA samples suffered the highest rise in permeability, porosity and chloride diffusion, and the greatest loss in compressive strength
1. Mehta P. K. “Concrete in the marine environment.” London: Taylor & Francis; 2003
2. Safiuddin Md., Hearn N. “Comparison of ASTM saturation techniques for measuring the permeable porosity of concrete”, Cement and Concrete Research 2005; 35: 1008-1013.
3. Ganjian E., Pouya H. Effect of magnesium and sulfate ions on durability of silica fume blended mixes exposed to the seawater tidal zone. Cement and Concrete Researsh 2005; 35: 1332-1343.
4. Lee S. T. H., Swamy R.N. Sulfate attack and role of silica fume in resisting strength loss. Cement & Concrete Composites 2005; 27: 65-76.
5. Sezer G., Ramyar K., Karasu B. A. B., Sezer A. Image analysis of sulfate attack on hardened cement past. Materials and Desig 2008; 29: 224-231.
6. Shannag M. J., Hussein A.S. Sulfate resistance of high-performance concrerte. Cement & Concrete Composites 2003; 25: 363-369.
7. Huseyin Y., Halit Y., Serdar A. Effects of cement type, water/cement ratio and cement content on sea water resistance of concrete. Building and Environment 2007; 42: 1770–1776.
8. Roy D.M., Arjunan P., Silsbee M.R. Effect of silica fume, metakaolin, and low-calcium fly ash on chemical resistance of concrete. Cement and Concrete Research 2001; 31: 1809–1813.
9. Sideris K.K., Savva A.E., Papayianni J. Sulfate resistance and carbonation of plain and blended cements., Cement & Concrete Composites 2006; 28: 47–56.
10. Al-Dulaijan S. U., Maslehuddin M., Al-Zahrani M. M., Sharif A. M., Shameem M. and Ibrahim M. Sulfate resistance of plain and blended cements exposed to varying concentrations of sodium sulfate, Cement and Concrete Composites 2003; 25: 429-437 .
11. Mitchell L. D, Margeson J. C. The effects of solvents on C–S–H as determined by thermal analysis. Journal of Thermal Analysis and Calorimetry 2006; 86: 591–594.
12. Poon C.S., Kou S.C., Lam L. “Compressive strength, chloride diffusivity and pore structure of high performance metakaolin and silica fume concrete.” Construction and Building Materials; 2006; 20: 858-865.
13. UNE. 80303-1 Cements with additional characteristics. Part 1: Sulphate resisting cements; 2001.
14. EHE. Spanish Instruction of Structural Concrete; 2008.
15. ASTM C494 / C494M - 05 Standard Specification for Chemical Admixtures for Concrete; 2005.
16. Canovas MF., Concrete. 7th ed. Madrid (Spain): Colegio de Ingenieros de Caminos, Canales y Puertos; 2004 (in Spanish).
17. UNE-EN - 12390-2 Testing hardened concrete - Part 2: Making and curing specimens for strength tests; 2001.
18. UNE-EN - 12390-3 Testing hardened concrete - Part 3: Compressive strength of test specimens; 2003.
19. UNE-EN - 12390-6 Testing hardened concrete - Part 6: Tensile splitting strength of test specimens; 2001.
20. UNE - 83316 Concrete tests. determination of the modulus of elasticity in compression; 1996.
21. RILEM TC 116-PCD Tests for gas permeability of concrete - Preconditioning of concrete test specimens for the measurement of gas permeability and capillary absorption of water - Measurement of the gas permeability of concrete by the RILEM - CEMBUREAU method - Determination. RILEM Publications SARL 1999; 32: 174 - 179.
22. ASTM D 4404-84 Test Method for Determination of the Pore Volume and Pore Volume Distribution of Soil and Rock by Mercury Intrusion Porosimetry; 1985.
23. Lea F.M. The Chemistry of Cement and Concrete. Fourth Edition. Edward Arnold; 1974.
24. Ubbriaco P., Calabrese D. Solidification and stabilization of cement paste containing fly ash from municipal waste. Thermochimica Acta 1998; 321: 143.
25. Bentz D. P., Stutzman P. E. Evolution of porosity and calcium hydroxide in laboratory concretes containing silica fume. Cement and Concrete Research 1994; 24: 1044-1050.
26. Bai J., Wild S., Sabir B.B., Chloride ingress and strength loss in concrete with different PCPFA-MK binder
Cite
@article{acperproISITES2018ID54, author={Edris, Walid Fouad and Abdelkader, Safwat and Pozo, Encarnacion Reyes and Terrades, Amparo Moragues}, title={Influence of mineral additions on the microstructure of concrete in chloride environment}, journal={Academic Perspective Procedia}, eissn={2667-5862}, volume={1}, year=2018, pages={283-292}}
Edris, W. , Abdelkader, S. , Pozo, E. , Terrades, A.. (2018). Influence of mineral additions on the microstructure of concrete in chloride environment. Academic Perspective Procedia, 1 (1), 283-292. DOI: 10.33793/acperpro.01.01.54
%0 Academic Perspective Procedia (ACPERPRO) Influence of mineral additions on the microstructure of concrete in chloride environment% A Walid Fouad Edris , Safwat Abdelkader , Encarnacion Reyes Pozo , Amparo Moragues Terrades% T Influence of mineral additions on the microstructure of concrete in chloride environment% D 11/9/2018% J Academic Perspective Procedia (ACPERPRO)% P 283-292% V 1% N 1% R doi: 10.33793/acperpro.01.01.54% U 10.33793/acperpro.01.01.54