Abstract

In this study, the thermodynamic performance of hornbeam sawdust (HSD) is examined regarding to content conversion performance, system energy efficiency and hot gas efficiency. The thermodynamic performance of hornbeam sawdust in case of 50, 75 and 100 sL/min air flow rate and varied powers between 3 kW and 6 kW is presented. The syngas content conversion performance of hornbeam sawdust is varied between 336% and 604%. The system energy efficiency of hornbeam sawdust is varied between 20.6 % and 32.57 %. The hot gas efficiency of sawdust is varied between 28.1 % and 46.31%.

References

[1] Yoon SJ, Yun YM, Seo MW, Kim YK, Ra HW, Lee J-G. Hydrogen and syngas productionfrom glycerol through microwave plasma gasification. International Journal of Hydrogen Energy2013:38:14559-67.
[2] Tu W-K, et al. Products and bioenergy from the pyrolysis of rice straw via radio frequencyplasma and its kinetics. Bioresource Technology 2009:100:2052-61.
[3] Uhm HS, Kwak HS, Hong YC. Carbon dioxide elimination and regeneration of resourcesin a microwave plasma torch. Environmental Pollution 2016:211:191-7.
[4] Hong YC, Lee SJ, Shin DH, Kim YJ, Lee BJ, Cho SY, Chang HS. Syngas production fromgasification of brown coal in a microwave torch plasma. Energy 2012:47:36-40.
[5] Yoon SJ, Lee J-G. Hydrogen-rich syngas production through coal and charcoal gasificationusing microwave steam and air plasma torch. International Journal of Hydrogen Energy2012:37:17093-100.
[6] Huang H, Tang L. Pyrolysis treatment of waste tire powder in a capacitively coupled RFplasma reactor. Energy Conversion and Management 2009:50:611-7.
[7] Lee HG, Park H-W, Choi S, Park H-S, Park D-W. Production of Synthesis Gas from Coalby DC Non-Transferred Steam Plasma Gasification System. Journal of Chemical Engineering ofJapon 2014:47:334-9.
[8] Hlina M, Hrabovsky M, Kavka T, Konrad M. Production of high quality syngas fromargon/water plasma gasification of biomass and waste. Waste Management 2014:34:63-6.
[9] Shie J-L, Chen L-X, Lin K-L, Chang C-Y. Plasmatron gasification of biomasslignocellulosic waste materials derived from municipal solid waste. Energy 2014:66:82-9.
[10] Sanlisoy A, Carpinlioglu MO, Presentation of a Microwave Plasma Gasification System“MCw Gasifier” in Fourth European Conference on Renewable Energy Systems (ECRES2016).2016: Istanbul. p. 503-6.
[11] Sanlisoy A, Melez H, Carpinlioglu MO. Characteristics of the Solid Fuels for the PlasmaGasification. Energy Procedia 2017:141:282-6.
[12] Sanlisoy A, Carpinlioglu MO. Preliminary measurements on microwave plasma flame forgasification. Energy, Ecology and Environment 2017:
[13] Sanlisoy A, An Experimental Investigation on Design and Performance of PlasmaGasification Systems, in Mechanical Engineering Department of Gaziantep University. 2018,Gaziantep University.
[14] Çarpınlıoğlu MÖ. Katı Atıkların Enerji Dönüşümünde Plazma Gazlaştırma Kullanımı ileÇalışan Laboratuvar Ölçekli Bir Test Düzeneğinin (Mikrodalga Gazlaştırıcı) "Mcwgazlaştırıcı"Tasarım Üretim ve Performans Değerlendirilmesi-Plazma Gazlaştırma Teknolojisinin-BilgininÜretilip Kullanılmasında Bir Vaka TUBITAK 115M389 final report 2018:
[15] Carpinlioglu MO, Sanlisoy A. Performance assessment of plasma gasification for waste toenergy conversion: A methodology for thermodynamic analysis. International Journal of HydrogenEnergy 2018:43:11493-504.
[16] Çengel YA, Boles MA, Thermodynamics: an engineering approach. 2007, USA: McGrawHill.
[17] Channiwala SA, Parikh PP. A unified correlation for estimating HHV of solid, liquid andgaseous fuels. Fuel 2002:81:1051-63.